ACS310 actuator is designed for fast installation and debugging – especially the pumps and fans application and design.

The driver is equipped with a group of meet the application requirements of pump and fan function – with advanced, high efficiency and energy saving function.

ACS310 with standard two powerful, independent built-in PID controller, used for according to the actual need adjustment pressure, flow or other numerical.

The second PID controller can eliminate the need for externa for wind power generation l PID controller, and help to improve the process quality, save energy and pre-project cost.

IC simplifies PFC and SPFC built-in pump and fan control (IC simplifies PFC) switch according to the capacitance change need to assist pump opened and closed.

Automatic switching functionmay wind generators keep pump working time between pump is consistent. With IC simplifies PFC function, a drive can simultaneously concurrent control a few pump or fan. Interlock function allows the drives to detect the pump can’t use, in this case, the next available pump start-up.

Pump and fan soft start-up control (SPFC) is used in a new auxiliary motor startup expectations low pressure peak, in the application of switching pump and fan. SPFC considered a realization directly type (assist) motor soft start-up simple method.

ACS310 with standard of advanced pump protection function, such as pipelines filling – a pre-programmed (or control method to start pump system filled pipes. In the closed-loop control activated before, in the pipe gently to water filling.

Wash pump function in equipment when wind turbines executing a start-up or need pre-programmed (or cleaning pump process, such as digital input or current/torque limit.

Related Articals